New computation — RandSolar

Computations are saved in this browser tab only, not in the database. Closing the tab clears them. The load catalog still uses the server.

Site

Name the job, then choose monthly bill sizing or a full appliance schedule.

Project name Client Location Establishment System type Notes

How to size this job

Use the monthly kWh on the electric bill when you do not have a load list. Use the load schedule when you can list every appliance.

Monthly consumption (kWh) From the Meralco / utility bill Billing days Solar offset (%) 100 covers the whole bill Peak demand (kW) — optional

Enter monthly kWh to see panels and daily energy.

Load schedule

Enter each load by hand. Use the catalog only as a starting wattage — change anything that does not match the site.

Appliance / equipment	Watts	Qty	Hours / day	Wh / day
				0
Totals				0

Connected load: 0 W

System parameters

These are installer inputs, not defaults you have to keep. Change panel wattage, sun hours, battery, and prices to match the quotation you intend to give.

Array

Peak sun hours Panel wattage (W) System voltage (V) Diversity factor (0.1–1.0)

Battery & losses

Battery type Days of autonomy

Unit Ah Unit volts

Depth of discharge (%) Leave at least 20% unused. Discharging below 20% state of charge damages the battery. Controller

Efficiency & prices (₱)

Inverter % Battery % Other %

Panel unit cost Inverter cost / kW Battery cost / kWh

Controller unit Mounting / panel

Wiring % Labor %

Cancel

Kept in this browser tab, not written to the database.